View Single Post
  #7  
Old 11-29-2019, 07:53 PM
yooper69's Avatar
yooper69 yooper69 is offline
Elite Member
 
Join Date: Dec 2017
Location: Michigan
Posts: 1,373
Default

Y
Originally Posted by Chipk View post
Charly-In-Ct-Ri inFebruary posted a brilliant repair for broken mouse ears. A;l credit goes to him. I just tweaked his ideas.

No matter how careful I am kneeling and standing I somehow managed to break a half dozen expensive coils. I tried repairing them with nylon washers and even glueing them on before using them.

They still broke.

So I was enthusiastic in trying his repairs. But they centered around plastic electrical boxes that he cut and reshaped using PVC glue and primer. But I could never find the right size. They were always too large.

Well one day I was wandering through Home Depot and found myself on the PVC aisle and saw some joints and connectors that looked like they might work. So I bought several sizes and headed to my garage.

First I selected a coil and with my Drexel I started carefully slicing away the broken ears. Then I took my sander and smoothed it off. I then selected the right size cap and placed it on the coil and it looked like there was adequate surface area to support it.

Next I measured where to drill the holes and after using 4 different sized drill bits I had the right holes. But after connecting everything I realized there was still too much play. So I began adding nylon washers until I had a good combination for a snug fit.

I wanted to be able to have a little vertical play with the shaft so I took the Drexel and cut a space in the cap at the back. A little use of the sander smoothed up the edges. Then I also sanded the bottom of the connector to rough up the surface so the PVC glues will hold better.

Then I painted it. Mostly to hide my poor craftmanship.

I first used PVC Primer and then PVC glue to attach the 2 pieces. Always add the adhesives on both pieces. I let it sit overnight.

The next morning I tried to break the bond but it seems strong.

Itís a bit of a challenge to hook up the bolt, coil and washers because itís a tight fit but perseverance will make it happen. A foam sealant might help if thereís too much play but this seems to be what I need.

I took my Garrett ATPro with the patched 5x8 coil out yesterday and today. I was cautious at first but before long I forgot I was using a broken coil. No problems and I even found a few things.
Curious to know how your repair is holding up? I just had the left coil ear on my nox 15 in coil break and thinking of trying your method . Thanks Mike

__________________
EQ-800
2020 Silver Coins 34-FTY
(11-Rosie) (12-Merc) (3-BD) (1-SD) (2-(2-GWQ) (2-BQ) (1 SLQ) (2-W-N) (18-IHP)

Reply With Quote